PBS brake pads are put trough a heat curing treatment in the manufacturing process. This process removes unwanted gasses from the materials in advance, reducing the gasses that can cause fade within the brake pad. Because of this treatment, PBS brake pads only need light bedding in to match the padding to the disc.
Brake pads should be bedded in until up to mid range working temperature then allowed to cool properly. This will also help to removes any gasses that are still within the pad. Not following this process may cause problems leading to a decrease in optimum performance.
With an operating temperature window of 0-800°C, this pad system will handle most serious breaking conditions. Great for racing or track day use with low dust and great brake disc life.
All PBS, Performance brake solutions ltd brake pads are solely developed for Motorsport use. They are intended for race use only. They have not been developed for use on public roads and must not, under any circumstances, be used on public roads. The nature of racing prevents PBS Performance brake solutions ltd from warranting or guaranteeing any aspect of the behaviour or performance of the brake pads, specifically because Motorsport is inherently dangerous and the use of PBS, Performance brake solutions ltd brake pads in Motorsport results in inherent strains and uses over which PBS, Performance brake solutions ltd has no control.
FURTHER TO THE FOREGOING, EXCEPT FOR THE EXPRESS WARRANTY GIVEN IN THE RESPECT OF CONFORMITY OF THE BRAKE PADS TO THE MANUFACTURING SPECIFICATIONS, PBS, Performance brake solutions ltd DISCLAIMS ANY AND ALL WARRANTIES Of ANY KIND, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANT ABILITY OR FITNESS FOR A PARTICULAR PURPOSE.